Thermal Transfer Ribbon Slitting and Rewinding Machine (TTR)

• Customization: Available
• Application: Thermal Transfer Ribbon Slitting Machine
• Type: Roll Slitter
• Model NO.: TTR-1000
• Work Method: Flat Knife Slitting
• Structure: Leader System
• Packaging: Thermal Transfer Ribbon
• Classification: Thermal Transfer Ribbon Slitter
• Applicable Process: Process Materials
• Suitable Substrates: Thermal Transfer Ribbon
• Packaging Material: Plastic
• Color of Thermal Transfer Ribbon Slitter: Light Gray
• Material of Thermal Transfer Ribbon Slit: Steel
• Leader System on TTR Slitter: Automatic, Semi-Automatic, Manual
• Control for Slit and Rewind Machine: Siemens PLC and Touch Screen
• Speed of Slitting and Rewinding Machine: 300m/Min
• Transport Package: Thermal Transfer Ribbon Slitter Wrap with Film
• Specification: Thermal transfer ribbon Slitter was accord to CE
• Trademark: Y. E
• Origin: Ruian, Zhejiang
• HS Code: 84773090
• Production Capacity: 20sets Thermal Transfer Ribbon Slitter Per Month

Product Description

Use:

Thermal transfer Ribbon slitting and rewinding machine is mainly suitable for slitting thermal transfer Ribbon. High speed 300m/min and PLC controlled.

Featrues:   

1. It can slit films in thickness from 4-20 um.
2. With air shaft 1 and 0.5 inch (diameter), suitable for different size or materials of ribbon, to improve the working efficiency

3. Guiding roller: Ceramic surface to avoid damage from blade. Main roller and the pressing roller are made by wearable rubber to make sure the normal working dynamic.
 
4. Touch screen, with SIEMENS PLC: The system is reliable and adjustable. Ribbon tension is calculated according to different ribbon roll diameter and slitting speed. This will help to make sure that the ribbon tension is well controlled.
 
5. The ribbon length can be set and accurate 0.5% allowance. it can set in two different lengths at the same time to fit to different barcode ribbon slitting task.
 
6. Driver system: Japan SANYO servo motor which can make sure the speed and tension are controlled accurately. Rewinding system is also by SANYO servo motor.
 
7. For the edge(waste) ribbon collection system 2kinds, independent torque motor rolling system and waste sucking system.
8. Leader system( manual ,semi-auto or auto leader table for choose )

Main Parameters:

TTR-1000 Machine Data
Jumbo roll width	1010/1050mm in max
Jumbo roll max diameter	600mm
Film thickness	4-20um
Blade number	25units
Main engine power	6KW
Max Working speed	300m/min
Jumbo roll core diameter	6inch
Jumbo installation	Without axle inside
Jumbo roll position	Adjustable in 0-100m
Finished roll size	1inch 1/2inch
Max Finished roll diameter	140mm
Power	Single/three phase 380V
Air	0.5-0.8Mpa
Weight	2000kgs
Oversize	2500*2500*1800mm

TTR finished rolls on slitter:


Paper core loaded:


Manufacturing show for slitting and rewinding machine: